3. Connect another jump lead between the (-) terminal on the auxiliary battery
and the (-) terminal on the tractor battery.
WARNING: Make sure that the jump leads are properly connected
to the terminals. Otherwise the jump leads can cause a short
circuit, which might lead to the explosion of the battery.
4. Start the engine.
5. When the engine has started, disconnect the jump leads in the following
order:
• Remove the jump lead between the (-) terminals.
• Remove the jump lead between the (+) terminals.
3.4 Using lights
3.4.1 Using the light switch
GUID-F7FDA353-7370-4A14-90F4-292028A04B95
1. Rotary light switch
2. Off position
3. Parking lights
4. Driving lights
5. Upper headlights
6. Multifunction lever
• Turn the light switch to the parking lights position to use the parking lights.
• Turn the light switch to the driving lights position to use the driving lights.
Working lights operate only when the parking lights or driving lights are
switched on.
3. Operation
- 76 -