3.12.9 Entering the split drive view
You can enter the split drive view from the menu 1.
GUID-46D3381D-541F-4322-8B3C-6B1EBCC3D20C
1. Split drive view
1. Press ESC.
2. Navigate to the menu 1 with the up and down arrow buttons.
3. Press the left arrow button.
The split drive view is displayed.
3.12.10 Changing the lower field views
You can select the views shown in the lower fields of the split drive view. The
same view cannot be seen in both the fields at the same time.
You have to select the split drive view to change the lower field views.
1. Press OK or the selector for the predefined factory/user settings.
The lower left field is activated, and a rectangle is displayed around it.
C3
A5
1
01:40
Km
2.18
0
AUTO 1
PB4
GUID-64A707C7-0CB0-40CF-96FF-54B3C1B48B6B
1. The activated field.
2. Activate either the left or the right field with the left and right arrow buttons.
You can activate the lower right field also by pressing OK or the selector for
the predefined factory/user settings.
3. Select the desired view in the field with the up and down arrow buttons or by
rotating the selector for the predefined factory/user settings.
3. Operation
- 165 -
To Next Page
Loading...
Need help?
General
