• The letter L shows that the driving speed is under 3 km/h (2 mph).
• Driving speeds of 0–10 km/h (0-10 mph) are shown with an accuracy of one
decimal place.
• Driving speeds of 10–15 km/h (10-15 mph) are shown with an accuracy of
one decimal place in steps of 0.2 units.
• Driving speeds of over 15 km/h (15 mph) are shown without decimals.
You can change the driving speed unit by changing the unit of length.
3.10.2.5 Wheel slip view
The wheel slip of the tractor is shown as a percentage.
GUID-98A82551-2D14-4552-9279-CE5E7868629E
1. Wheel slip
The wheel slip view shows the wheel slip percentage. The wheel slip percentage
is attained by comparing the speed information of the radar to the rotation speed
of the wheels. The radar starts to operate at a driving speed of 0.3 km/h. For
driving speeds below 0.3 km/h, zero is displayed.
3.10.2.6 Rear power take-off speed view
The rear power take-off (PTO) speed is shown in revolutions per minute
(rpm).
GUID-341115A5-088F-44A7-BB56-74842F513735
1. Rear power take-off speed
The PTO rotation speed is shown beside the symbol with an accuracy of 10 rpm.
3. Operation
- 139 -
To Next Page
Loading...
Need help?
General
