GUID-B6DC7DFF-60C8-4520-87B2-B1DB7A9806A7
1. Engine RPM memory button
2. Hand throttle
• Activate the engine speed cruise control.
• Activate an engine speed value that is already saved in the memory by
pressing the engine RPM memory button shortly (less than two seconds).
• Save a new engine RPM value into the memory and activate it by setting
the desired engine RPM with the hand throttle, drive pedal or the
adjustment wheel and press the engine RPM memory button for a longer
time (two seconds).
• Deactivate the engine speed cruise control.
• Press the engine RPM memory button shortly (less than two seconds).
• If the driving speed is more than 20 km/h, press the brake pedal or clutch
pedal.
When the engine speed cruise control is activated and the Auto1 driving mode is
selected, pressing the drive pedal or using the hand throttle increases the driving
speed only and not the engine speed.
3.8.16 Automatic traction control
The automatic traction control allows you to stop the tractor using only the brake
pedal so that you do not have to operate the clutch pedal or the power shuttle
lever.
Automatic traction control is useful in traffic and for example on jobs where you
have to stop the tractor and at the same time use power take-off (PTO).
You only need to use the clutch pedal when you want to slip the clutch or when
you want to assist the start with the brakes. The clutch pedal also forces the
traction to disengage if necessary.
3. Operation
- 122 -
To Next Page
Loading...
Need help?
General
