GUID-E88D4737-61B1-4B52-964E-9F2A48C84B3A
1. Suction strainer cover
2. Suction strainer
1. Remove the suction strainer cover.
2. Wipe off any oil which has run out on the chassis.
3. Clean the suction strainer in diesel fuel.
Replace the suction strainer if it is damaged.
4. Dry the suction strainer with compressed air.
5. Refit the suction strainer, gaskets and cover.
Fill the transmission with oil.
4.7.6.4 Bleeding the brake system
The brake system uses the same oil as the transmission system. The oil in the
brake circuits is not changed when changing the transmission oil. Therefore, the
brake circuit oil has to be changed by bleeding after every transmission oil
change. Also when repairing, the system has to be filled and bled in the same
way.
4. Maintenance
- 368 -
To Next Page
Loading...
Need help?
General
