• To activate or deactivate the ECO mode, press the ECO button.
3.8.13 Parking the tractor
1. Stop the tractor.
2. Apply the parking brake.
3. Lower the implements.
In cold conditions, lower the links without implements as well.
4. Reduce the engine speed to idling.
IMPORTANT: Before stopping the engine, allow the engine temperature to
stabilise for at least two minutes.
In some situations (for example, after working with a heavy load) when you
engage the parking brake, the engine may perform cooling of the after-
treatment system by increasing the idling RPM momentarily. The word COOL
flashes on the A-pillar display.
IMPORTANT: Do not stop the engine while the idling rpm is increased and
the word COOL flashes on the A-pillar display. Stopping the engine may
damage the after-treatment system.
5. Stop the engine by turning the ignition key to the OFF position.
6. Fill up the fuel tank.
In order to minimise water condensation, fill up the tank when finishing work
for the day.
3.8.14 Refuelling the tractor
3.8.14.1 Filling the fuel tank
WARNING: Always turn off the power before filling up.
WARNING: Do not smoke while refuelling the tractor.
WARNING: Keep away from open fire.
WARNING: Wear suitable gloves when filling up.
3. Operation
- 114 -
To Next Page
Loading...
Need help?
General
