155
File Destination / Output Destination FP11
Received Fax documents will be routed to the output tray or Mailbox specified by these settings.
1. Press the Log In / Out button to enter System Administration Mode.
2. On the keypad enter [11111] or current password. Touch Confirm when finished.
3. Touch System Settings.
4. Touch System Settings, again.
5. Touch Fax Mode Settings.
6. Select File Destination/Output Destination.
7. Select the Box Selector – Line Setup button.
8. Touch Change Settings.
9. Make the appropriate selections and touch Save when done.
Note: If Box Selector is selected as an Output Destination, when On is selected, you will have to
enter a mailbox number, then touch Save.
10. When complete, touch Close until the System Settings screen (with an Exit button) is displayed.
11. Touch Exit to exit the System Settings screen.
To Next Page
Loading...
Need help?
General
