43
Viewing or Configuring the SMB Host Name with Internet Services
1. Open your Web browser and enter the TCP/IP address of the Device in the Address or Location field.
Press Enter.
2. Click the Properties Tab.
3. Click the plus symbol (+) to the left of the Protocol Settings file folder.
4. Select SMB in the directory tree.
5. The available selections include:
A text box indicating Workgroup name.
A text box indicating the SMB Host name.
An entry box for the maximum number of connections allowed, labeled Maximum Sessions.
A TBCP Filter checkbox (displayed when PostScript is enabled). Click Help for an explanation of the
use of this feature.
An enabling checkbox for Auto Driver Download, enabling the Device to push a driver to a client.
An enabling checkbox for supporting Unicode (supplying the Host name and Workgroup name in
Unicode characters during SMB transmission).
An enabling checkbox for Auto Master Mode. When the master browser for the workgroup cannot be
found, if this box is checked, this host will become the master browser.
An enabling checkbox for Password Encryption (during SMB transmission).
6. Either accept the default SMB Host Name, which is automatically built by the Device to assure the
name's uniqueness, or enter in your preferred name. Note that this will be the NetBIOS name that is
resolved by the Naming Server (DNS or WINS) to an IP Address for the Device.
7. To apply setting changes, click the Apply button, then click the Reboot button to reboot the device.
To exit without making any changes, click the Undo button.
To Next Page
Loading...
Need help?
General
