31
Exiting the Protocol Settings Menu and returning to the Device's Main Menu
1. To exit the Protocol Settings menu, returning to the Device's Main screen, press the rectangular
Close button in the upper right corner of the Protocol Settings menu screen.
2. Press the rectangular Close button in the upper right corner of the Network Settings screen.
3. Press the rectangular Close button in the upper right corner of the System Settings button.
4. Finally, press the rectangular Exit button in the upper right corner of the System Settings screen.
Note: If you changed any settings in the Protocol Settings menu, the Device will automatically reboot
to register and enable your new settings.
To Next Page
Loading...
Need help?
General
