193
Testing Network Scanning (using templates)
1. Go to the machine and press the All Services button.
2. Press the Network Scanning button.
3. See if the template you created is displayed on screen.
4. If it is, press it. If it is not, return to the beginning of this section and repeat the required procedures.
5. Place a document in the document handler and press the Start button located to the immediate right
of the Control Panel’s numeric keypad.
6. On a network-connected PC, open a connection to the repository server, log in, and see if the
document arrived in the repository folder.
To Next Page
Loading...
Need help?
General
