194
Web Service (if available)
The Web Service button on the machine, if available, enables users to view Internet or Intranet web
servers on the machine’s User Interface, and to send scanned files to web servers through job flow
sheets, if the server login and password are valid as entered on the job flow sheet. In addition to
performing the set up procedure described here, make sure to refer to the Proxy Server Settings topic,
in the Network Connectivity section of this guide, for instructions on setting up Proxy Server parameters
(similar to setting up connections for a standard web browser). To set up and use Job Flow Sheets with
Mailboxes, refer to that topic in the Options section of this guide.
1. Press the Log In / Out button to enter System Administration Mode.
2. On the keypad enter [11111] or the current password. Touch Confirm when finished.
3. Touch System Settings.
4. Touch System Settings, again.
5. Touch Web Service Settings.
6. Touch Server Setup.
7. Select an unused Web Service Server line.
8. Touch Change Settings.
9. Touch Server Name, then Change Settings.
10. Use the displayed keyboard to enter a Server Name, then touch Save.
11. Touch the URL line, then Change Settings.
12. Use the displayed keyboard to enter a URL for the web server, then touch Save.
13. Touch Close repeatedly until the System Settings screen (with an Exit button) is displayed.
14. Touch Exit.
To Next Page
Loading...
Need help?
General
