251
Set the Ethernet Speed N5.0
1. Open your Web browser and enter the TCP/IP address of the Device in the Address or Location field.
Press Enter.
2. Click the Properties tab.
3. Click the folder in the directory tree labeled Port Settings.
4. Click the Ethernet hot link.
5. Select your network speed from the drop-down list.
6. Click the Apply button to accept the changes, or the Undo button to return the settings to their
previous values.
Note: Changes to settings are not applied until you restart the Device. A Reboot Machine button is
available on the Status Tab of Internet Services.
To Next Page
Loading...
Need help?
General
