ABB ACS560 User Manual

16 Introduction to the manual
Terms and abbreviations
Term/abbreviation Explanation
ACS-BP-S Basic control panel, basic operator keypad for communication with the
drive.
ACS-AP-x Assistant control panel, advanced operator keypad for communication
with the drive.
The ACS560 supports types ACS-AP-I, ACS-AP-S and ACS-AP-W.
AI Analog input; interface for analog input signals
AO Analog output; interface for analog output signals
BACnet™ BACnet™ is a registered trademark of American Society of Heating,
Refrigerating and Air-Conditioning Engineers (ASHRAE).
Brake chopper Conducts the surplus energy from the intermediate circuit of the drive to
the brake resistor when necessary. The chopper operates when the DC
link voltage exceeds a certain maximum limit. The voltage rise is
typically caused by deceleration (braking) of a high inertia motor.
Brake resistor Dissipates the drive surplus braking energy conducted by the brake
chopper to heat. Essential part of the brake circuit. See chapter Brake
chopper in the Hardware manual of the drive.
BIO-01 Optional I/O extension module underneath the fieldbus adapter module.
Control board Circuit board in which the control program runs.
DC link DC circuit between rectifier and inverter
DC link capacitors Energy storage which stabilizes the intermediate circuit DC voltage
DI Digital input; interface for digital input signals
DPMP-01 Mounting platform for ACS-AP control panel (flange mounting)
DPMP-02/03 Mounting platform for ACS-AP control panel (surface mounting)
Drive Frequency converter for controlling AC motors
EFB Embedded fieldbus
FBA Fieldbus adapter
FCAN-01 Optional CANopen adapter module
FCNA-01 ControlNet adapter module
FECA-01 Optional EtherCAT adapter module
FENA-01/-11/-21 Optional Ethernet adapter module for EtherNet/IP, Modbus TCP and
PROFINET IO protocols
FEPL-02 Ethernet POWERLINK adapter module
FLON-01 L
ONWORKS® adapter module
FPBA-01 Optional PROFIBUS DP adapter module
Frame (size) Refers to drive physical size, for example R0 and R1. The type
designation label attached to the drive shows the frame of the drive, see
chapter Operation principle and hardware description, section Ty p e
designation label in the Hardware manual of the drive.
IGBT Insulated gate bipolar transistor: used for high efficiency and fast
switching

ABB ACS560 Specifications

General

Frequency	50/60 Hz
Control Method	Scalar control
Protection Features	Overcurrent, overvoltage, undervoltage, short circuit
Communication Interfaces	Modbus RTU, Profibus DP, CANopen, Ethernet/IP
Enclosure Rating	IP21
Ambient Temperature	-10 to +50 °C
Input Voltage	380 to 480 V AC
Cooling Method	Air cooling (natural convection or forced ventilation)