Barco DP2K SLP Series Service Manual

113
About this chapter
This chapter gives a brief introduction of the Light Pipe and its components. Futhermore, this chapter includes
the replacement procedure of the Fold Mirror, High Contrast Plate, Light Sensor, Notch Filter, and Light Pipe
Lenses No1-2-3-4. Note that the service information about the Integration Rod is grouped in a separate
chapter in this manual, see chapter “Integration Rod”, page 139.
Overview
•
Introduction Light Pipe
• Removal of the Light Pipe
• Removal of the Light Pipe cover plate
• Replacing Light Pipe lens No1 (focus lens)
• Replacing Light Pipe lens No2
• Replacing Light Pipe lens No3 (zoom lens)
• Replacing Light Pipe lens No4
• Cleaning the Light Pipe lenses
• Installing the Light Pipe cover plate
• Installing the Light Pipe
• Adjusting the Light Pipe lens No1 (focus lens)
• Adjusting the Light Pipe lens No3 (zoom lens)
• Replacing the Notch Filter
• Adjusting the Notch Filter
• Cleaning the Notch Filter
• Replacing the Fold Mirror set
• Adjusting the Fold Mirror
• Cleaning the Fold Mirrors
• Replacing the High Contrast plate
• Replacing the Light Sensor module (CLO)
• Replacement of the Light Pipe fan
R5906848 /04 DP2K SLP Series
Light Pipe 10

Barco DP2K SLP Series Specifications

General

Brand	Barco
Model	DP2K SLP Series
Category	Projector
Language	English