Barco DP2K SLP Series Service Manual

R5906848 /04 DP2K SLP Series 33
Interconnection diagram Mains Input
Light
Source
SMPS
CINEMA
CONTROLLER
BOARD
BACKPLANE
TERMINAL ON/OFF MAINS FILTER
SOLID
STATE
RELAY
Image 4-2
4.2 Accessing the Mains Input compartment
WARNING: Disconnect the power cord of the projector from the power net and wait a few minutes
(to discharge the capacitors) prior to starting this procedure.
Required tools
Flat screwdriver 8 mm
How to access the compartment of the Mains Input?
1. Remove the rear cover of the projector. See procedure “Removal of the rear cover”, page 272.
2. Remove the cover of the Mains Input compartment by releasing the two captive thumb screws (reference 1
Image 4-3) .
1
Image 4-3
Mains Input

Barco DP2K SLP Series Specifications

General

Brand	Barco
Model	DP2K SLP Series
Category	Projector
Language	English