Using the M4 TORNADO Software
M4 TORNADO
125
Object Description Hints
Elements Allows settings for every element
for quantification
Clickable periodic table of elements
for editing element settings
Selection of element colour
Element name and lines
Selection of the displayed lines
Clear all changes made to element
settings
Accept all changes made in this
panel
Otherwise changes will be lost
6.11.3 Spectrometer calibration
The panel Spectrometer is mainly used for the energy calibration of the instrument. The energy
calibration of the XFlash
®
detectors typically is very stable. Nevertheless, it should be performed if
peaks of the measured spectrum do not correctly fit the KLM-markers.
Fig. 57 The panel Spectrometer
The following functions are available.