Maintenance of the M4 TORNADO
M4 TORNADO
153
If the fuses blow again upon replacement, the instrument must be disconnected from the mains
supply and the service of Bruker Nano GmbH should be informed.
9.2 Cleaning of the Turntable
The sample chamber should always be kept clean because contamination can influence the
analytical result. For cleaning, it is recommended to use a soft tissue or exhaust in case of
stronger contamination.
The stage should be cleaned only with non-aggressive cleansing agents.
Caution!
The detector is located close above the measurement position. It has a
beryllium window, which should never be touched. The exposure to beryllium is
poisonous. This part is protected by a sheet. Never remove this sheet. It is also
not permitted to introduce tools or other objects into the measuring part,
because this can lead to the destruction of the detector or the primary beam
optics.
To Next Page
Loading...
Need help?
General
