EasyManuals Logo
Home>Cisco>Network Router>7604

Cisco 7604 User Manual

Cisco 7604
1011 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #142 background imageLoading...
Page #142 background image
9-18
Cisco 7600 Series Router Cisco IOS Software Configuration Guide, Release 12.2SX
OL-4266-08
Chapter 9 Configuring Interfaces
Monitoring and Maintaining Interfaces
This example shows how to clear and reset the counters on Fast Ethernet port 5/5:
Router# clear counters fastethernet 5/5
Clear "show interface" counters on this interface [confirm] y
Router#
*Sep 30 08:42:55: %CLEAR-5-COUNTERS: Clear counter on interface FastEthernet5/5
The clear counters command clears all the current counters from the interface unless the optional
arguments specify a specific interface.
Note The clear counters command clears counters displayed with the EXEC show interfaces command, not
counters retrieved using SNMP.
Resetting an Interface
To reset an interface, perform this task:
This example shows how to reset Fast Ethernet port 5/5:
Router# clear interface fastethernet 5/5
Router#
Shutting Down and Restarting an Interface
You can shut down an interface, which disables all functions on the specified interface and shows the
interface as unavailable on all monitoring command displays. This information is communicated to other
network servers through all dynamic routing protocols. The interface is not included in any routing
updates.
To shut down an interface and then restart it, perform this task:
This example shows how to shut down Fast Ethernet port 5/5:
Router(config)# interface fastethernet 5/5
Router(config-if)# shutdown
Router(config-if)#
1. type = ethernet, fastethernet, gigabitethernet, or tengigabitethernet
Command Purpose
Router# clear interface
type
1
slot/port
1. type = ethernet, fastethernet, gigabitethernet, or tengigabitethernet
Resets an interface.
Command Purpose
Step 1
Router(config)# interface {{vlan
vlan_ID
} |
{
type
1
slot/port
} | {port-channel
channel_ID
}}
1. type = ethernet, fastethernet, gigabitethernet, or tengigabitethernet
Selects the interface to be configured.
Step 2
Router(config-if)# shutdown
Shuts down the interface.
Step 3
Router(config-if)# no shutdown
Reenables the interface.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco 7604 and is the answer not in the manual?

Cisco 7604 Specifications

General IconGeneral
BrandCisco
Model7604
CategoryNetwork Router
LanguageEnglish

Related product manuals