15-17
Cisco 7600 Series Router Cisco IOS Software Configuration Guide, Release 12.2SX
OL-4266-08
Chapter 15 Configuring Private VLANs
Monitoring Private VLANs
Monitoring Private VLANs
Table 15-1 shows the privileged EXEC commands for monitoring private VLAN activity.
This is an example of the output from the show vlan private-vlan command:
Switch(config)# show vlan private-vlan
Primary Secondary Type Ports
------- --------- ----------------- ------------------------------------------
10 501 isolated Fa2/0/1, Gi3/0/1, Gi3/0/2
10 502 community Fa2/0/11, Gi3/0/1, Gi3/0/4
10 503 non-operational
Tip For additional information (including configuration examples and troubleshooting information), see the
documents listed on this page:
http://www.cisco.com/en/US/products/hw/routers/ps368/tsd_products_support_series_home.html
Table 15-1 Private VLAN Monitoring Commands
Command Purpose
show interfaces status Displays the status of interfaces, including the VLANs to which they
belong.
show vlan private-vlan
[type]
Displays the private VLAN information for the router.
show interface switchport Displays private VLAN configuration on interfaces.
show interface
private-vlan mapping
Displays information about the private VLAN mapping for VLAN SVIs.
To Next Page
Loading...
Need help?
General
