Cisco 7604 User Manual

CHAPTER
12-1
Cisco 7600 Series Router Cisco IOS Software Configuration Guide, Release 12.2SX
OL-4266-08
12
Configuring EtherChannels
This chapter describes how to configure EtherChannels on the Cisco 7600 series router Layer 2 or
Layer 3 LAN ports.
Note For complete syntax and usage information for the commands used in this chapter, refer to the Cisco IOS
Master Command List, Release 12.2SX at this URL:
http://www.cisco.com/en/US/docs/ios/mcl/122sxmcl/12_2sx_mcl_book.html
This chapter consists of these sections:
• Understanding How EtherChannels Work, page 12-1
• EtherChannel Feature Configuration Guidelines and Restrictions, page 12-5
• Configuring EtherChannels, page 12-7
Tip For additional information (including configuration examples and troubleshooting information), see the
documents listed on this page:
http://www.cisco.com/en/US/products/hw/routers/ps368/tsd_products_support_series_home.html
Understanding How EtherChannels Work
These sections describe how EtherChannels work:
• EtherChannel Feature Overview, page 12-2
• Understanding How EtherChannels Are Configured, page 12-2
• Understanding Port Channel Interfaces, page 12-5
• Understanding Load Balancing, page 12-5

Cisco 7604 Specifications

General

Brand	Cisco
Model	7604
Category	Network Router
Language	English