CHAPTER
15-1
Cisco 7600 Series Router Cisco IOS Software Configuration Guide, Release 12.2SX
OL-4266-08
15
Configuring Private VLANs
This chapter describes how to configure private VLANs on the Cisco 7600 series routers.
Note For complete syntax and usage information for the commands used in this chapter, refer to the Cisco IOS
Master Command List, Release 12.2SX at this URL:
http://www.cisco.com/en/US/docs/ios/mcl/122sxmcl/12_2sx_mcl_book.html
This chapter consists of these sections:
• Understanding How Private VLANs Work, page 15-1
• Private VLAN Configuration Guidelines and Restrictions, page 15-6
• Configuring Private VLANs, page 15-11
• Monitoring Private VLANs, page 15-17
Tip For additional information (including configuration examples and troubleshooting information), see the
documents listed on this page:
http://www.cisco.com/en/US/products/hw/routers/ps368/tsd_products_support_series_home.html
Understanding How Private VLANs Work
These sections describe how private VLANs work:
• Private VLAN Domains, page 15-2
• Private VLAN Ports, page 15-3
• Primary, Isolated, and Community VLANs, page 15-3
• Private VLAN Port Isolation, page 15-4
• IP Addressing Scheme with Private VLANs, page 15-4
• Private VLANs Across Multiple Routers, page 15-5
• Private VLAN Interaction with Other Features, page 15-5
To Next Page
Loading...
Need help?
General
