Cisco 7604 User Manual

27-8
Cisco 7600 Series Router Cisco IOS Software Configuration Guide, Release 12.2SX
OL-4266-08
Chapter 27 Configuring IPv6 Multicast PFC3 and DFC3 Layer 3 Switching
Using show Commands to Verify IPv6 Multicast Layer 3 Switching
Displaying the Shared and Well-Known Hardware Adjacency Counters
The show platform software ipv6-multicast shared-adjacencies command displays the shared and
well-known hardware adjacency counters used for IPv6 multicast by entries in FIB and ACL-TCAM.
Router# show platform software ipv6-multicast shared-adjacencies
---- SLOT [1] ----
Shared IPv6 Mcast Adjacencies Index Packets Bytes
----------------------------- ------ ------------- ------------------
Subnet bridge adjacency 0x7F802 0 0
Control bridge adjacency 0x7 0 0
StarG_M bridge adjacency 0x8 0 0
S_G bridge adjacency 0x9 0 0
Default drop adjacency 0xA 0 0
StarG (spt == INF) adjacency 0xB 0 0
StarG (spt != INF) adjacency 0xC 0 0
---- SLOT [6] ----
Shared IPv6 Mcast Adjacencies Index Packets Bytes
----------------------------- ------ ------------- ------------------
Subnet bridge adjacency 0x7F802 0 0
Control bridge adjacency 0x7 0 0
StarG_M bridge adjacency 0x8 0 0
S_G bridge adjacency 0x9 0 0
Default drop adjacency 0xA 28237 3146058
StarG (spt == INF) adjacency 0xB 0 0
StarG (spt != INF) adjacency 0xC 0 0
Tip For additional information (including configuration examples and troubleshooting information), see the
documents listed on this page:
http://www.cisco.com/en/US/products/hw/routers/ps368/tsd_products_support_series_home.html

Cisco 7604 Specifications

General

Brand	Cisco
Model	7604
Category	Network Router
Language	English