CHAPTER
1-1
Cisco 7600 Series Router Cisco IOS Software Configuration Guide, Release 12.2SX
OL-4266-08
1
Product Overview
This chapter consists of these sections:
• Supported Hardware and Software, page 1-1
• User Interfaces, page 1-1
• Configuring Embedded CiscoView Support, page 1-2
• Software Features Supported in Hardware by the PFC and DFC, page 1-3
Tip For additional information (including configuration examples and troubleshooting information), see the
documents listed on this page:
http://www.cisco.com/en/US/products/hw/routers/ps368/tsd_products_support_series_home.html
Supported Hardware and Software
For complete information about the chassis, modules, and software features supported by the Cisco 7600
series routers, refer to the Release Notes for Cisco IOS Release 12.2SX on the Supervisor Engine 720,
Supervisor Engine 32, and Supervisor Engine 2.
User Interfaces
Release 12.2SX supports configuration using the following interfaces:
• CLI—See Chapter 2, “Command-Line Interfaces.”
• SNMP—Refer to the Release 12.2 IOS Configuration Fundamentals Configuration Guide and
Command Reference at this URL:
http://www.cisco.com/en/US/docs/ios/12_2/configfun/configuration/guide/ffun_c.html
• Cisco IOS web browser interface—Refer to “Using the Cisco Web Browser” in the IOS
Configuration Fundamentals Configuration Guide at this URL:
http://www.cisco.com/en/US/docs/ios/12_2/configfun/configuration/guide/fcf005.html
• Embedded CiscoView—See the “Configuring Embedded CiscoView Support” section on page 1-2.
To Next Page
Loading...
Need help?
General
