Cisco 7604 User Manual

27-7
Cisco 7600 Series Router Cisco IOS Software Configuration Guide, Release 12.2SX
OL-4266-08
Chapter 27 Configuring IPv6 Multicast PFC3 and DFC3 Layer 3 Switching
Using show Commands to Verify IPv6 Multicast Layer 3 Switching
IPv6 Multicast FIB SC summary on Slot[6]:
Shortcut Type Shortcut count
---------------------------+--------------
(*, G/128) 10
(*, G/m) 47
Displaying the NetFlow Hardware Forwarding Count
This example shows how to display the NetFlow hardware forwarding count:
Router# show platform software ipv6-multicast summary
IPv6 Multicast Netflow SC summary on Slot[1]:
Shortcut Type Shortcut count
---------------------------+--------------
(S, G) 100
(*, G) 0
<...Output deleted...>
IPv6 Multicast Netflow SC summary on Slot[6]:
Shortcut Type Shortcut count
---------------------------+--------------
(S, G) 100
(*, G) 0
<...Output truncated...>
Note The NetFlow (*, G) count is always zero because PIM-SM (*,G) forwarding is supported in software on
the MSFC3.
Displaying the FIB Hardware Bridging and Drop Counts
This example shows how to display the FIB hardware bridging and drop hardware counts:
Router# show platform software ipv6-multicast summary | begin FIB
IPv6 Multicast FIB SC summary on Slot[1]:
Shortcut Type Shortcut count
---------------------------+--------------
(*, G/128) 10
(*, G/m) 47
<...Output deleted...>
IPv6 Multicast FIB SC summary on Slot[6]:
Shortcut Type Shortcut count
---------------------------+--------------
(*, G/128) 10
(*, G/m) 47
Note • The (*, G/128) value is a hardware bridge entry count.
• The (*, G/m) value is a hardware bridge/drop entry count.

Cisco 7604 Specifications

General

Brand	Cisco
Model	7604
Category	Network Router
Language	English