EasyManuals Logo
Home>Cisco>Network Router>7604

Cisco 7604 User Manual

Cisco 7604
1011 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #475 background imageLoading...
Page #475 background image
30-15
Cisco 7600 Series Router Cisco IOS Software Configuration Guide, Release 12.2SX
OL-4266-08
Chapter 30 Configuring IGMP Snooping for IPv4 Multicast Traffic
Configuring IGMP Snooping
Displaying IGMP Snooping Information for a VLAN Interface
To display IGMP snooping information for a VLAN interface, perform this task:
This example shows how to display IGMP snooping information on the VLAN 200 interface:
Router# show ip igmp interface vlan 43
Vlan43 is up, line protocol is up
Internet address is 43.0.0.1/24
IGMP is enabled on interface
Current IGMP host version is 2
Current IGMP router version is 2
IGMP query interval is 60 seconds
IGMP querier timeout is 120 seconds
IGMP max query response time is 10 seconds
Last member query count is 2
Last member query response interval is 1000 ms
Inbound IGMP access group is not set
IGMP activity:1 joins, 0 leaves
Multicast routing is enabled on interface
Multicast TTL threshold is 0
Multicast designated router (DR) is 43.0.0.1 (this system)
IGMP querying router is 43.0.0.1 (this system)
Multicast groups joined by this system (number of users):
224.0.1.40(1)
IGMP snooping is globally enabled
IGMP snooping is enabled on this interface
IGMP snooping fast-leave is disabled and querier is disabled
IGMP snooping explicit-tracking is enabled on this interface
IGMP snooping last member query interval on this interface is 1000 ms
Router#
Displaying IGMP Snooping Statistics
The show ip igmp snooping statistics interface vlan_ID command displays the following information:
The list of ports that are members of a group
The filter mode
The reporter-address behind the port
The last-join and last-leave information collected since the last time a clear ip igmp snooping
statistics command was entered
To display IGMP snooping statistics, perform this task:
Command Purpose
Router# show ip igmp interface
vlan_ID
Displays IGMP snooping information on a VLAN
interface.
Command Purpose
Router# show ip igmp snooping statistics
interface
vlan_ID
Displays IGMP snooping information on a VLAN
interface.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco 7604 and is the answer not in the manual?

Cisco 7604 Specifications

General IconGeneral
BrandCisco
Model7604
CategoryNetwork Router
LanguageEnglish

Related product manuals