Cisco 7604 User Manual

55-7
Cisco 7600 Series Router Cisco IOS Software Configuration Guide, Release 12.2SX
OL-4266-08
Chapter 55 Configuring Generic Online Diagnostics
Running Online Diagnostic Tests
Displaying Online Diagnostic Tests and Test Results
You can display the online diagnostic tests that are configured and check the results of the tests using
the show commands.
To display the diagnostic tests that are configured, perform this task:
This example shows how to display the online diagnostics that are configured:
Router# show diagnostic content module 1
Module 1:
Diagnostics test suite attributes:
M/C/* - Minimal bootup level test / Complete bootup level test / NA
B/* - Basic ondemand test / NA
P/V/* - Per port test / Per device test / NA
D/N/* - Disruptive test / Non-disruptive test / NA
S/* - Only applicable to standby unit / NA
X/* - Not a health monitoring test / NA
F/* - Fixed monitoring interval test / NA
E/* - Always enabled monitoring test / NA
A/I - Monitoring is active / Monitoring is inactive
R/* - Power-down line cards and need reset supervisor / NA
K/* - Require resetting the line card after the test has completed / NA
Testing Interval
ID Test Name Attributes (day hh:mm:ss.ms)
==== ================================== ============ =================
1) TestScratchRegister -------------> ***N****A** 000 00:00:30.00
2) TestSPRPInbandPing --------------> ***N****A** 000 00:00:15.00
3) TestTransceiverIntegrity --------> **PD****I** not configured
4) TestActiveToStandbyLoopback -----> M*PDS***I** not configured
5) TestLoopback --------------------> M*PD****I** not configured
6) TestNewLearn --------------------> M**N****I** not configured
7) TestIndexLearn ------------------> M**N****I** not configured
8) TestDontLearn -------------------> M**N****I** not configured
9) TestConditionalLearn ------------> M**N****I** not configured
10) TestBadBpdu ---------------------> M**D****I** not configured
11) TestTrap ------------------------> M**D****I** not configured
12) TestMatch -----------------------> M**D****I** not configured
13) TestCapture ---------------------> M**D****I** not configured
14) TestProtocolMatch ---------------> M**D****I** not configured
15) TestChannel ---------------------> M**D****I** not configured
16) TestFibDevices ------------------> M**N****I** not configured
17) TestIPv4FibShortcut -------------> M**N****I** not configured
18) TestL3Capture2 ------------------> M**N****I** not configured
19) TestIPv6FibShortcut -------------> M**N****I** not configured
20) TestMPLSFibShortcut -------------> M**N****I** not configured
21) TestNATFibShortcut --------------> M**N****I** not configured
22) TestAclPermit -------------------> M**N****I** not configured
23) TestAclDeny ---------------------> M**D****I** not configured
24) TestQoSTcam ---------------------> M**D****I** not configured
25) TestL3VlanMet -------------------> M**N****I** not configured
26) TestIngressSpan -----------------> M**N****I** not configured
27) TestEgressSpan ------------------> M**N****I** not configured
28) TestNetflowInlineRewrite --------> C*PD****I** not configured
Command Purpose
show diagnostic content [module 1]
Displays the online diagnostics that are configured.

Cisco 7604 Specifications

General

Brand	Cisco
Model	7604
Category	Network Router
Language	English