Cisco 7604 User Manual

CHAPTER
27-1
Cisco 7600 Series Router Cisco IOS Software Configuration Guide, Release 12.2SX
OL-4266-08
27
Configuring IPv6 Multicast PFC3 and DFC3
Layer 3 Switching
With Release 12.2(18)SXE and later releases, the PFC3 and DFC3 provide hardware support for IPv6
multicast traffic. Use these publications to configure IPv6 multicast on Cisco 7600 series routers:
• The Cisco IOS IPv6 Configuration Library, “Implementing IPv6 Multicast”:
http://www.cisco.com/en/US/docs/ios/ipv6/configuration/guide/12_2sx/ipv6_12_2sx_book.html
• The Cisco IOS IPv6 Command Reference:
http://www.cisco.com/en/US/docs/ios/ipv6/command/reference/ipv6_book.html
These sections provide additional information about IPv6 multicast support on Cisco 7600 series
routers:
• Features that Support IPv6 Multicast, page 27-2
• IPv6 Multicast Guidelines and Restrictions, page 27-2
• New or Changed IPv6 Multicast Commands, page 27-3
• Configuring IPv6 Multicast Layer 3 Switching, page 27-3
• Using show Commands to Verify IPv6 Multicast Layer 3 Switching, page 27-3
Tip For additional information (including configuration examples and troubleshooting information), see the
documents listed on this page:
http://www.cisco.com/en/US/products/hw/routers/ps368/tsd_products_support_series_home.html

Cisco 7604 Specifications

General

Brand	Cisco
Model	7604
Category	Network Router
Language	English