Digi Connect EZ Mini User Manual

System administration Update system firmware
Digi Connect EZ Mini User Guide
610
1. Select the device in Remote Manager and click Actions > Open Console, or log into the
Connect EZ local command line as a user with full Admin access rights.
Depending on your device configuration, you may be presented with an Access selection
menu. Type admin to access the Admin CLI.
2. >Use the system firmware ota check command to determine if new modem firmware is
available on the Digi firmware repository.
> system firmware ota check
Current firmware version is 23.3.31.129
Checking for latest Connect EZ firmware...
Newest firmware version available to download is '23.6.1.105'
Device firmware update from '23.3.31.129' to '23.6.1.105' is needed
>
3. Use the modem firmware ota list command to list available firmware on the Digi firmware
repository.
> system firmware ota list
23.3.31.129
23.6.1.105
>
4. Perform an OTAfirmware update:
n To perform an OTAfirmware update by using the most recent available firmware from
the Digi firmware repository:
a. Update the firmware:
> system firmware ota update
Downloading firmware version '23.6.1.105'...
Downloaded firmware /tmp/cli_firmware.bin remaining
Applying firmware version '23.6.1.105'...
41388K
netflash: got "/tmp/cli_firmware.bin", length=42381373
netflash: authentication successful
netflash: vendor and product names are verified.
netflash: programming FLASH device /dev/flash/image1
41408K 100%
Firmware update completed, reboot device
>
b. Reboot the device:
> reboot
>
n To perform an OTAfirmware update by using a specific version from the Digi firmware
repository, use the version parameter to identify the appropriate firmware version as
determined by using system firmware ota list command. For example:

Digi Connect EZ Mini Specifications

General

Brand	Digi
Model	Connect EZ Mini
Category	Server
Language	English