System administration Update system firmware
Digi Connect EZ Mini User Guide
611
a. Update the firmware:
> system firmware ota update version 23.6.1.105
Downloading firmware version '23.6.1.105'...
Downloaded firmware /tmp/cli_firmware.bin remaining
Applying firmware version '23.6.1.105'...
41388K
netflash: got "/tmp/cli_firmware.bin", length=42381373
netflash: authentication successful
netflash: vendor and product names are verified.
netflash: programming FLASH device /dev/flash/image1
41408K 100%
Firmware update completed, reboot device
>
b. Reboot the device:
> reboot
>
Update firmware from a local file
Web
1. Download the Connect EZ operating system firmware from the Digi Support FTP site to your
local machine.
2. Log into the Connect EZ WebUI as a user with Admin access.
3. On the main menu, click System. Under Administration, click Firmware Update.
4. Click Choose file.
5. Browse to the location of the firmware on your local file system and select the file.
6. Click Update Firmware.
Command line
1. Download the Connect EZ operating system firmware from the Digi Support FTP site to your
local machine.
2. Select the device in Remote Manager and click Actions > Open Console, or log into the
Connect EZ local command line as a user with full Admin access rights.
To Next Page
Loading...
Need help?
General