142 Printing Basics
Setting Paper Sizes and Types
When loading print media, set the paper size and type on the operator panel before printing.
This section describes how to set the paper size and type on the operator panel.
See also:
• "Understanding the Printer Menus" on page 296
îš„ Setting Paper Sizes
1 Press the (System) button.
2 Select Tray Settings, and then press the button.
3 Select MPF, and then press the button.
4 Select Paper Size, and then press the button.
5 Select the correct paper size for the print media loaded, and then press the button.
îš„ Setting Paper Types
IMPORTANT:
• Paper type settings must match those of the actual print media loaded in the tray. Otherwise, print-quality
problems can occur.
1 Press the (System) button.
2 Select Tray Settings, and then press the button.
3 Select MPF, and then press the button.
4 Select Paper Type, and then press the button.
5 Select the correct paper type for the print media loaded, and then press the button.
To Next Page
Loading...
Need help?
General
