166 Copying
Making Copies From the ADF (DocuPrint CM215
f/CM215 fw Only)
IMPORTANT:
• Do not load more than 15 sheets on the ADF or allow more than 15 sheets to be fed to the document output
tray. The document output tray should be emptied before it holds more than 15 sheets or your source
documents may be damaged.
NOTE:
• To get the best scan quality, especially for color or gray scale images, use the
document glass
instead of the
ADF
.
• A computer connection is not required for copying.
• You cannot load the following documents in the ADF. Be sure to place them on the document glass.
To make copy from the ADF:
1 Load up to 15 sheets of 64 gsm documents facing up on the ADF with top edge of the documents
in first. Then adjust the document guides to the correct document size.
NOTE:
• Be sure to adjust the document guides before copying a legal-size document.
2 Press the (Copy) button.
3 Customize the copy settings such as number of copies, copy size, and image quality.
See also:
• "Setting Copy Options" on page 167
To clear the settings, use the CA (Clear All) button.
NOTE:
• The options automatically return to default statuses when the next copy service is initiated or the auto
clear timer expires.
4 Press the (Start) button to begin copying.
NOTE:
• Press the (Stop) button to cancel a copy job at any time while scanning a document.
Curled originals Pre-punched paper
Lightweight originals Folded, creased or torn originals
Cut and paste originals Carbon paper
To Next Page
Loading...
Need help?
General
