Fuji Xerox DocuPrint CM215 series User Manual

Using the Operator Panel Menus and Keypad 315
• Alert Tone
Purpose:
To configure settings for tones emitted by the printer during operation or when a warning message
appears.
Values:
Time Format 12H* Specifies the time format.
24H
Time Zone Specifies the time zone.
Panel Select
Tone
Off* Does not emit a tone when the operator panel input is correct.
Min Emits a tone at the specified volume when the operator panel
input is correct.
Middle
Max
Panel Alert
Tone
Off* Does not emit a tone when the operator panel input is
incorrect.
Min Emits a tone at the specified volume when the operator panel
input is incorrect.
Middle
Max
Auto Clear
Alert
Off* Does not emit a tone before the printer performs auto clear.
Min Emits a tone at the specified volume five seconds before the
printer performs auto clear.
Middle
Max
Job Tone Off Does not emit a tone when a job is complete.
Min Emits a tone at the specified volume when a job is complete.
Middle*
Max
Alert Tone Off Does not emit a tone when a problem occurs.
Min Emits a tone at the specified volume when a problem occurs.
Middle*
Max
Out of Paper Off Does not emit a tone when the printer runs out of paper.
Min Emits a tone at the specified volume when the printer runs out
of paper.
Middle*
Max
All Tones Off Disables all the alert tones.
Min Sets the volume of all the alert tones at once.
Middle
Max

Fuji Xerox DocuPrint CM215 series Specifications

General

Brand	Fuji Xerox
Model	DocuPrint CM215 series
Category	Printer
Language	English