Fuji Xerox DocuPrint CM215 series User Manual

Maintenance 421
 Cleaning the Color Toner Density (CTD) Sensor
Clean the CTD sensor only when an alert for the CTD sensor is shown on the Printer Status window
or operator panel.
1 Turn off the printer and disconnect the power cord.
2 Push the rear cover handle and open the rear cover.
3 Clean the CTD sensor inside the printer with a clean dry cotton swab.
4 Close the rear cover.
5 Turn on the printer.

Fuji Xerox DocuPrint CM215 series Specifications

General

Brand	Fuji Xerox
Model	DocuPrint CM215 series
Category	Printer
Language	English