Fuji Xerox DocuPrint CM215 series User Manual

Using the Operator Panel Menus and Keypad 311
• Fax Fwd Number
Purpose:
To enter the fax number of the destination to where incoming faxes will be forwarded.
• Fax Fwd E-Mail
Purpose:
To enter the e-mail address to where incoming faxes will be sent with an e-mail.
•Prefix Dial
Purpose:
To select whether to set a prefix dial number.
Values:
• Prefix Dial Num
Purpose:
To set a prefix dial number of up to five digits. This number dials before any auto dial number is
started. It is useful for accessing the Private Automatic Branch Exchange (PABX).
• Discard Size
Purpose:
To set whether to discard text or images at the bottom of a fax page when the entire page does not fit
onto the output paper.
Values:
•ECM
Purpose:
To set whether to enable the Error Correction Mode (ECM). To use the ECM, the remote machines
must also support the ECM.
Values:
Off* Does not set a prefix dial number.
On Sets a prefix dial number.
Off Prints any excess at the bottom of a fax page without discarding it.
On Discards any excess at the bottom of a fax page.
Auto Reduction* Automatically reduces a fax page to fit it onto the output paper.
Off Disable the ECM.
On* Enables the ECM.

Fuji Xerox DocuPrint CM215 series Specifications

General

Brand	Fuji Xerox
Model	DocuPrint CM215 series
Category	Printer
Language	English