Faxing (DocuPrint CM215 f/CM215 fw Only) 251
îš„ Sending a Fax Manually
1 Load the document(s) facing up with top edge in first into the ADF or place a single document
facing down on the document glass and close the document cover.
See also:
• "Loading an Original Document on the ADF" on page 244
• "Loading an Original Document on the Document Glass" on page 245
2 Press the (Fax) button.
3 Adjust the document resolution to suit your fax needs.
See also:
• "Resolution" on page 246
• "Lighter/Darker" on page 248
4 Select OnHook, and then press the button.
5 Select On, and then press the button.
6 Enter the fax number by one of the following way.
• Select Fax to, and then press the button. Select Keypad, and then press the button.
Enter the fax number of the remote fax machine using the numeric keypad, and then press the
button.
• Press the One-touch button, and then press the button.
• Press the (Address Book) button, select All Entries, Group Dial, or Search using the
button, and then press the button.
• If the document is loaded on the ADF, press the (Start) button.
• If the document is not loaded on the ADF, press the (Start) button, select the desired
setting, and then press the button.
NOTE:
• Press the (Stop) button to cancel the fax job at any time while sending the fax.
To Next Page
Loading...
Need help?
General
