Fuji Xerox DocuPrint CM215 series User Manual

Using the Operator Panel Menus and Keypad 313
• Fax Broadcast
Purpose:
To set whether to print a transmission report after every fax transmission to multiple destinations or
only when an error occurs.
Values:
•Region
Purpose:
To select the region where the printer is used.
System Settings
Use the System Settings menu to configure a variety of printer features.
NOTE:
• Asterisk (*) is the factory default setting.
• Power Saving Timer
Purpose:
To specify the time for transition to the Power Saver mode.
Values:
Select 5min (default) for Low Power Timer if your printer shares an electrical circuit with your room
lights and you notice them flickering. Otherwise, select a high value to keep your printer available for
frequent use with the minimum warm-up time.
The printer automatically returns to the standby mode from the Power Saver mode when it receives
data from the computer. In the Low Power mode, you can also return the printer to the standby mode
by pressing any button on the operator panel. In the Sleep mode, you can return the printer to the
standby mode by pressing the (Energy Saver) button.
Print Always* Prints a transmission report after every fax transmission.
Print On Error Prints a transmission report only when an error occurs.
Print Disable Does not print a transmission report after a fax transmission to
multiple destinations.
Low Power
Timer
5min* Specifies the time taken by the printer before it enters the Low
Power mode after it finishes a job.
5–30min
Sleep Timer 6min* Specifies the time taken by the printer before it enters the
Sleep mode after it goes into the Low Power mode.
1–6min

Fuji Xerox DocuPrint CM215 series Specifications

General

Brand	Fuji Xerox
Model	DocuPrint CM215 series
Category	Printer
Language	English