366 Troubleshooting
Print Quality Problems
This section includes:
• "The Output Is Too Light" on page 367
• "Toner Smears or Print Comes Off/Stain on Back Side" on page 368
• "Random Spots/Blurred Images" on page 369
• "The Entire Output Is Blank" on page 370
• "Streaks Appear on the Output" on page 371
• "Pitched Color Dots" on page 372
• "Vertical Blanks" on page 373
• "Mottle" on page 374
• "Ghosting" on page 375
• "Fog" on page 376
• "Bead-Carry-Out (BCO)" on page 377
• "Auger Mark" on page 378
• "Wrinkled/Stained Paper" on page 379
• "The Top Margin Is Incorrect" on page 380
• "Color Registration Is out of Alignment" on page 381
• "Protrudent/Bumpy Paper" on page 382
NOTE:
• In this section, some procedures use the Printer Setting Utility or the SimpleMonitor. Some procedures that
use the Printer Setting Utility can also be performed using the operator panel.
See also:
• "Understanding the Printer Menus" on page 296
• "Printer Setting Utility (Windows Only)" on page 58
• "SimpleMonitor (Windows Only)" on page 59
To Next Page
Loading...
Need help?
General
