Fuji Xerox DocuPrint CM215 series User Manual

320 Using the Operator Panel Menus and Keypad
• Initialize NVM
Purpose:
To initialize NVM for system parameters, Address Book data for fax, or Address Book data for e-mail.
After executing this function and rebooting the printer, the menu parameters or data, except the
parameters for the network, are reset to their factory default values. (Address Book is available only
on the DocuPrint CM215 f/CM215 fw.)
See also:
• "Resetting to Factory Defaults" on page 343
Values:
DocuPrint CM215 f/CM215 fw:
DocuPrint CM215 b:
• Non-Genuine Mode
Purpose:
To us e toner cartridges of another manufacturer.
NOTE:
• Using non-genuine toner cartridges may make some printer features unusable, reduce print quality and
decrease the reliability of your printer. Fuji Xerox recommends only new Fuji Xerox brand toner cartridges for
your printer. Fuji Xerox does not provide warranty coverage for problems caused by using consumables not
supplied by Fuji Xerox.
• Before you use toner cartridges of another manufacturer, be sure to restart the printer.
Values:
User Fax
Section
Yes Initializes the fax number entries in the Address Book.
No* Does not initialize the fax number entries in the Address Book.
User Scan
Section
Yes Initializes the e-mail and server address entries in the Address
Book.
No* Does not initialize the e-mail and server address entries in the
Address Book.
System Section Yes Initializes the system parameters.
No* Does not initialize the system parameters.
System Section Yes Initializes the system parameters.
No* Does not initialize the system parameters.
Off* Does not use toner cartridges of another manufacturer.
On Uses toner cartridges of another manufacturer.

Fuji Xerox DocuPrint CM215 series Specifications

General

Brand	Fuji Xerox
Model	DocuPrint CM215 series
Category	Printer
Language	English