72 Printer Connection and Software Installation
Ethernet Connection (DocuPrint CM215 f/CM215 fw Only)
To connect the printer to a computer via Ethernet:
1 Make sure that the printer is turned off and all cables have been disconnected.
2 Connect an end of Ethernet cable into the Ethernet port at the rear of the printer, and the other
end to an Ethernet port of a router or hub.
NOTE:
• Connect the Ethernet cable, only if you need to setup a wired connection. Connecting the Ethernet cable
stops some features or functions for Wireless network.
Ethernet port
To Next Page
Loading...
Need help?
General
