2-6 Dash 2500 Patient Monitor 2042480-001 C
Product Overview: Optional Components
Optional Components
NOTE: Interconnected equipment must be installed by a qualified service
person. Refer to the Dash 2500 Patient Monitor Service Manual
(PN 2042481-001) for instructions.
Symbols
The following symbols are associated with the Dash 2500 Patient Monitor.
Zero - zeros the IBP determination.This hardkey is available only for use when
IBP is configured.IBP is not configured in Dash 2500.
Silence Alarm - temporarily silences alarms; acknowledges alarming crisis
conditions.
Power - turns Monitor off and on.
Print - prints a snapshot (timed recording) with a single-press. Pressing and
holding the key down allows for a continuous recording of the chosen
waveforms.
Freeze - captures up to 16.8 seconds of waveforms on the screen. The number
of seconds varies depending on the selected sweep speed.
Trend - enters and exits trends (view patient trends data). This hardkey can be
configured through the configuration mode to display two different views: mini
trends or full trends.
Standby - enters and exits standby mode.
Main - closes the menu system and takes you back to the main screen.
To Next Page
Loading...
Need help?
General
