3-12 Dash 2500 Patient Monitor 2042480-001 C
Using the Dash 2500 Patient Monitor: Helplines
Screen with Active SelectBox
The following table provides examples of conditions that cause messages to
flash in the SelectBox.
Helplines
Helplines appear at the bottom of the screen and continually offer information
relevant to the current menu option or task. For example, if the pointer is next to
the turn parameter off option in the a parameter’s setup menu, the helpline will
read Hint: push Trim Knob to suspend all monitoring/alarms for this
parameter.
Cause of Message
in SelectBox
Acknowledgment of
Message
Resulting Action
Freeze hardkey is
pushed
choose SelectBox View frozen waveforms
menu appears
System problem is
detected
correct problem or
choose SelectBox
message in SelectBox is
cleared and the alarm is
canceled
NIBP cannot
determine values
choose SelectBox message in SelectBox is
cleared and the alarm is
canceled