5-6 Dash 2500 Patient Monitor 2042480-001 C
Admit Patient: Admit Patient Menu
How to use popup window
1. Turn the Trim Knob to move the pointer to the desired character. Push the
Trim Knob to enter the character.
2. To add spaces, place the pointer next to SPACE selection and push the Trim
Knob as many times as necessary. To delete characters or spaces, place the
pointer next to BKSPACE selection and push the Trim Knob as many times
as necessary.
3. To confirm your choices, place the pointer next to DONE selection and push
the Trim Knob.
enter bed number
This option gives you access to a popup window containing the alphabet,
numbers 0-9, and punctuation. You can enter up to 4 characters. The patient's
bed number will appear in the patient information field (upper right corner of
screen) and on printouts.
enter unit number
This option gives you access to a popup window containing the alphabet,
numbers 0-9, and punctuation. You can enter up to 6 characters. The patient's
unit number will appear in the patient information field (upper right corner of
screen) and on printouts.
print active settings
This option lets you print all customized settings for the chosen default table. It is
available when the printer is not busy. Once started, a popup window appears
with the message, All active settings are being printed. To cancel, choose OK.
If you choose OK, printing will stop. Otherwise, when all settings for the chosen
default table have been printed, the popup window disappears.
To Next Page
Loading...
Need help?
General
