I
-
System Measurements
Making System Measurements
Step 8. Access the TV receiver mode (optional)
1.
Press
(MODE),
TV RECEIVER
or
2. Press
(-J
followed by
TV
RECEIVER
3.
Press CHANNEL SELECT , enter the channel you want to view with the
numeric keypad, then press
[ENTER).
You can also select channels by
using the large front-panel knob or front-panel arrow keys.
4.
Press PIX
&SND
ON OFF to turn the picture and sound on.
5. Adjust the volume and intensity knobs for the desired volume level and
picture intensity.
6. To exit TV picture and sound, press any of the following: WINDOWS
(ON),
(AUXCTRL),
l%i?%%],
or any
softkey.
7. Additionally, the TV picture and sound can be accessed from within the
system measurements mode by pressing WINDOWS (ON).
8. Channels can then be selected with the numeric keypad, then pressing
(ENTER). You can also use the knob or arrow keys for channel selection.
9. ‘lb exit TV picture and sound, press any of the following: WINDOWS
m,
(AUX),
(MODE],
or any
softkey.
10.
To exit this mode press Prev Menu
NOTE
Option 107 is required to access the TV receiver mode. Connections must be made to TV IN as shown
in Figure 3-4.
3-19
To Next Page
Loading...
Need help?
General
