I
-
Recalling Test Data from the RAM Card
1. If you have not done so already, connect the printer to the analyzer as
described in “Step 3. Install a printer,” located in Chapter 1.
2.
If Recall Data is not displayed, press
(j!GK)),
CABLE
TV ANALYZER,
More 1 of 2.
3.
Press Recall Data.
4. Use the large knob on the analyzer’s front panel to select the file that
you want. To select a
hle,
turn the knob until the file that you want is
highlighted.
5. Press DATA TO PRINTER to print the test data.
6.
Press DATA TO SCREEN to display test data on the screen.
3-35
To Next Page
Loading...
Need help?
General
