TV Receiver, Setup, and AUX CTRL Menu Maps and Softkey Descriptions
Softkey
Descriptions
SOUND
ON
OFF
Description
Allows you to turn the TV sound on and off. This feature is the same as the
TV
RECEIVER
mode of operation except that it is accessed from a front-panel
hardkey.
Press
L-CTRL),
Monitor TV to access SOUND ON OFF .
See Also
“Step 5. Access the TV receiver mode” in Chapter 2.
STD
Description
Allows you to select the standard (STD) channel tuning configuration.
If you do not select a channel configuration, the default configuration is
the standard (STD) configuration. The choices for the channel tuning
configuration are: standard (STD), off-the-air (AIR), incrementally related
carriers (IRC), harmonically related carriers (HRC), and T format.
The analyzer retains the channel tuning configuration selection, even when
power is turned off, until a new selection is made.
Press CABLE TV ANALYZER , Setup, Channel Tuning to access STD
See Also
“Step 1. Configure the test system” in Chapter 2.
7-16
To Next Page
Loading...
Need help?
General
