HP 8591C User Manual

I
-
TV Receiver, Setup, and AUX CTRL Menu Maps and Softkey Descriptions
Softkey Descriptions
T Description
Allows you to select the T channel tuning configuration. As an alternative to
making this selection, enter T channel numbers, 7 to 13, as negative numbers
when any of the 4 other
conEgurations are selected.
If you do not select a
channel tuning conEguration, the default configuration is the standard (STD)
configuration. The choices for the channel tuning configuration are: standard
(STD), off-the-air (AIR), incrementally related carriers (IRC), harmonically
related carriers (HRC), and T (upstream) format.
The channel tuning configuration selection is selected independently of the
test plan and is not stored with the test plan. The analyzer retains the
channel tuning configuration selection, even when power is turned off, until a
new selection is made.
Press CABLE TV ANALYZER, Setup , Channel Tuning to access T
See Also
“Step 1. ConEgure the test system” in Chapter 3.
7-19

HP 8591C Specifications

General

Brand	HP
Model	8591C
Category	Measuring Instruments
Language	English