I
-
System Measurements Menu Map and Softkey Descriptions
System Measurements Softkey Function Descriptions
NO
Description
Allows you to select not to do the function. If you press CLEAR TST PLAN
and then press NO , you have selected not to clear the current test plan from
analyzer memory. If you enter a channel by using ENTER BY CHANNEL or
ENTER BY RANGE and then press NO , the channel or range of channels will
be treated as channels that are not scrambled.
NO is accessed either by pressing CLEAR TST PLAN or by entering a
channel number with ENTER BY CHANNEL or ENTER BY RANGE .
PLAN
1
Description
Allows you to select test plan 1 as the test plan number for either saving the
current test plan or recalling a previously saved test plan.
Saving the current test Saving the current test plan overwrites any test plan previously saved in plan
plan in plan 1 1. When you save the current test plan in test plan 1, it is stored in trace
register 6.
The channel numbers, tests, scrambling status, channel tuning configuration,
quiet line number, frequency response line number, test signal line number,
and field selection are saved in the test plan.
The location code, the temperature, the selection of CTB testing, and the
setting for an external pad (EXT PAD YES NO
)
are not stored with the test
plan but are stored in nonvolatile analyzer memory and are retained until
changed.
6-23
I-
To Next Page
Loading...
Need help?
General
