System Measurements Menu Map and
Softkey
Descriptions
System Measurements
Softkey
Function Descriptions
Recall
TstPlan
Description
Allows you to access the softkeys used to recall a previously saved test plan
from analyzer memory, or from a RAM card.
Recalling a test plan overwrites the current test plan. If you do not want
the current test plan to be overwritten, save the current test plan before
recalling a new one. Press CABLE TV ANALYZER , SYSTEM
MEAS
to access
Recall
TstPlan
.
See Also
“Step 5. Recall a test plan” in Chapter 3.
“Recalling a Test Plan from a RAM Card” in Chapter 3.
SAVE
TO
INT
MEM
Description
Allows you to save the current test plan in analyzer memory.
Saving a test plan overwrites any previously saved test plan of the same test
plan number.
Up to five test plans can be saved in analyzer memory. The test plans are
saved in nonvolatile analyzer memory, in trace registers 6 through 10.
The channel numbers, tests, scrambling status, channel tuning
conEguration,
quiet line number, frequency response line number, test signal line number,
and Eeld selection are saved in the test plan.
6-29
To Next Page
Loading...
Need help?
General
