HP 8591C User Manual

I
-
System Measurements Menu Map and Softkey Descriptions
System Measurements Softkey Function Descriptions
ENTER LOCATION Description
Allows you to enter a location code. You do not have to enter a location code;
it is only for your convenience to help you keep track of where the test data
originated. The location code can be up to seven digits long.
If you do not enter a location code, the default location code will be either
the location code that was previously entered or, if a location code was not
previously entered, a “0.”
On the RAM card, the location code is stored in the test data hle. The
location code is printed when the test data is printed.
In analyzer memory, the location code is not stored with the current test plan
in plans 1 through 5. The location code is stored in nonvolatile analyzer
memory, however. Storing the location code in nonvolatile memory means
that once a location code is entered, it will be used as the location code until
a new location code is entered or the HP 85721A personality program is
deleted from analyzer memory.
Pressing CABLE TV ANALYZER, SYSTEM MEAS accesses ENTER LOCATION
Sea Also
“Step 3. Enter the location code” in Chapter 3.
6-19

HP 8591C Specifications

General

Brand	HP
Model	8591C
Category	Measuring Instruments
Language	English