HP 8591C User Manual

I
-
Setup for Cable TV Measurements
This section explains the steps that are necessary to prepare the analyzer for
making a measurement and printing out the results.
The steps are as follows:
l Load the HP 85721A personality into analyzer memory (if necessary).
l Perform the self-calibration routines.
0 Install a printer.
l Connect cable for non-interfering measurements.
l Start channel or system mode of operation.
NOTE
The HP 85721A personality is pre-loaded into the HP 8591C analyzer.
l-4

HP 8591C Specifications

General

Brand	HP
Model	8591C
Category	Measuring Instruments
Language	English